BraceBolt Features

Tamper Resistant Brace Securing System

BraceBolt complies with the new National Code of Practice For Precast, Tilt-up and Concrete Elements in Building Construction. Reduces the risk of unauthorized brace removal.

Grade 8.8 rated to WLL 22kn (2.2 tonne)

TESTED TO AS 3850-2003, ALL STATE & NATIONAL CODES OF PRACTICE

BraceBolt Benefits

– Easy installation
– High pull out strength
– Designed for 20 MPa concrete
– Clearly defined system approach
– Specially developed for the Precast & Tilt-up industry

Domed Socket Head

BraceBolt requires 14mm allen key drive, which reduces unauthorized removal (lockout tagout system) grade & manufactures ID are clearly marked for quick and easy validation.

Integrated forged 38mm washer

The integrated forged 38mm washer with locking serrations: forming part of the domed socket head to reduce the likelihood of undoing under cyclic loading. Washer sized to fit the safety foot. Bolt tensional loads are distributed correctly into the brace foot.

Uses the standard 20mm drill bit

BraceBolt uses the standard 20mm drill bit designed to sustain the high shear loads from wind induced cyclic loading. It also includes a solid 20mm Spigot designed to sustain the high shear loads from wind induced cyclic loading.

Page 1 of 2
1 2 »

  • OH&S Notes

    Before installation, the following conditions must be met:

    Refer to bracing plan on site and bracing requirements and a minimum concrete strength of 20MPa must be achieved.

    Anchors spacing to have a minimum distance of 250mm all around and a minimum edge distance 250mm

    Use safety equipment ­ eye protection, ear protection and face mask.

  • 14mm Hex Drive
    Tested to AS3850-2003
    Four Ribbed Expansion Sleeve
    Complies with RJB Industries SBS
  • Flanged Safety Bolt

    • Grade 8.8 Flanged Bolt
    • Domed flange head
    • 14mm Hex Drive for tamper resistance
    • Full M20 x 2.5 thread
    • Gal Plated
    Flanged Saftey Bolt

Copyright © 2010. All Rights Reserved.